I used my Epi SG, straight into the amp, 57 into my Mbox interface. No eq-ing or effects. Excuse the sucky playing...
http://www.mediamax.com/trevorus305/...EpiDeville.mp3
That's what a Deville should sound like! IMO
And it's the 410 version.
I used my Epi SG, straight into the amp, 57 into my Mbox interface. No eq-ing or effects. Excuse the sucky playing...
http://www.mediamax.com/trevorus305/...EpiDeville.mp3
That's what a Deville should sound like! IMO
And it's the 410 version.
Last edited by trevorus; 04-03-2007 at 09:28 PM.
Oh, yeah, I forgot to tell everyone the setup here. It's a USA model, EHX 6L6GC tubes, a mesa 12ax7 in V1, chinese 12ax7 in V2 and a GT 12ax7 in V3. I will be fiddling with the pre tubes soon, though.
you don't suck buddy. you're just jammin' and enjoying it.Originally Posted by trevorus
dig the sound, sounds awesome. would LOVE to have an sg classic.
How did you record?
"...pray do not imagine that those who make the noise are the only inhabitants of the field;
that, of course, they are many in number; or that, after all, they are other than the little,
shriveled, meagre, hopping, though loud and troublesome, insects of the hour."
-Edmund Burke
I used Audacity. Exported to MP3 with no effects. That is actually a low volume recording, so that's without any kind of power tube saturation.
I also forgot to mention the two other mods I made: The Boomybass mod on the Mid pot, and the reverb high pass resistor removal.
Both those mods from the Justin site?
Sounds nice & Fenderey to me. Are those the only 2 mods you did?
I've thought about some of the things on Justin's site for my HRDx, but when I stuck in all NOS tubes, it brought the amp to life so much I'm not sure I need to 'fix' anything.
Cheers,
- JJ
p.s., how's the Moreley?
"I bet your Momma was a tent-show Queen ..."
That's all I did. No tone stack value changes, nothing. Just cutting a 1/4" piece of wire and adding a 1/4" piece of wire. It doesn't change the basal characteristic Fender-y sound, but gives better control and smoothness. The high output preamp tubes make the drive very hot, yet not excessively grindy and buzzy. I like it that way, and if I put in a 12at7 or 12ay7 in V2, the drive channel gets cleaner and more bluesy.
BTW, the Morley is working wonderfully. Great volume pedal. I changed the sweep of the wah a bit, but it was a really simple mod.
Posting Permissions
Reply With Quote