Results 1 to 7 of 7

Thread: Tele vs. Strat necks

  1. #1
    Forum Member
    Join Date
    Feb 2024
    Location
    Eugene, OR
    Posts
    2

    Tele vs. Strat necks

    I currently have a Tele and two Strats, all Squiers, the Tele being the most recent. I have an old hand injury that is causing me to prefer thinner necks. I'm noticing that the Tele neck has a very high shoulder and is wider at the nut. Can I swap out a Squier Strat neck for a Tele? I know they were not interchangeable in the past on old Fenders.

    These Strat necks both have no shoulder.

    Thanks.

  2. #2
    TFF Stage Crew
    Moderator
    Cogs's Avatar
    Join Date
    Jul 2002
    Location
    Burpleson AFB
    Posts
    7,017

    Re: Tele vs. Strat necks

    The heels of strat necks & tele necks are different, strats being rounded (or curved) & teles more flat (or square). Unless you have a router, a jig or template, & some woodworking skills, I'd take it to a local tech to have kind of thing done

  3. #3
    Forum Member phantomman's Avatar
    Join Date
    Aug 2007
    Location
    Ten miles from the Mexican Frontier, in Arizona
    Posts
    7,321

    Re: Tele vs. Strat necks

    Quote Originally Posted by Cogs View Post
    ......I'd take it to a local tech to have that kind of thing done.
    Or buy a custom-made neck from Musikraft, USACG, etc. Such drastic transplants are not for the faint of heart nor those without the patience of Job.
    "When injustice becomes law then rebellion becomes duty."

  4. #4
    Forum Member blackonblack's Avatar
    Join Date
    Jan 2004
    Location
    point of reason between tacky and tasteless
    Posts
    1,401

    Re: Tele vs. Strat necks

    As I recall, you can put a Strat neck on a Tele without modifications (there will be a gap), but a Tele neck onto a Strat requires modification. There’s no place for the non curved area of the Tele neck to go in a Strat’s neck pocket.
    Mark

  5. #5
    Forum Member
    Join Date
    Feb 2024
    Location
    Eugene, OR
    Posts
    2

    Re: Tele vs. Strat necks

    Thank you, gentlemen. The Tele neck is completely unfinished, so I might start by doing a bit of light sanding/steel wool on that shoulder, as it seems to only be on the top side of the neck. I sure don't recall my old '69 Tele feeling like this, but then back then, my hands were newer, too . . .

  6. #6
    TFF Stage Crew
    Moderator
    Cogs's Avatar
    Join Date
    Jul 2002
    Location
    Burpleson AFB
    Posts
    7,017

    Re: Tele vs. Strat necks

    That would be a LOT of sanding to get it as curved as a Strat heel, just an fyi

  7. #7
    Forum Member phantomman's Avatar
    Join Date
    Aug 2007
    Location
    Ten miles from the Mexican Frontier, in Arizona
    Posts
    7,321

    Re: Tele vs. Strat necks

    Quote Originally Posted by Cogs View Post
    That would be a LOT of sanding to get it as curved as a Strat heel, just an fyi
    +1

    Better to use a vertical milling machine.
    "When injustice becomes law then rebellion becomes duty."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •