Results 1 to 3 of 3

Thread: replacing a fuse holder in an old Champ...help!

  1. #1
    Forum Member
    Join Date
    Jun 2020
    Posts
    4

    replacing a fuse holder in an old Champ...help!

    I've got about a "72 Silverface...the fuse holder is kaput. I've got the chassis out, and I've got the nut loose. I can't quite figure out how the fuse holder comes out. Do I need to disconnect the wires and slide the holder through the front? I'm bumfuzzled! And, it doesn't help that it's cloudy outside and I have every light on I can. I'd appreciate ANY suggestions

  2. #2
    Forum Member Keefoman1's Avatar
    Join Date
    Aug 2020
    Posts
    71

    Re: replacing a fuse holder in an old Champ...help!

    I guess the nut is on the outside of the chassis, and then it is logical that the holder should be removed through the inside of the chassis. To completely remove the holder, you ned to desolder the wires of course.

  3. #3
    Forum Member Don's Avatar
    Join Date
    Jul 2002
    Location
    Massachusetts
    Posts
    11,288

    Re: replacing a fuse holder in an old Champ...help!

    If it's original, the nut is on the inside. The nut needs to be removed and the wires disconnected so the fuse holder can be pulled out from the outside.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •