Results 1 to 4 of 4

Thread: Fender Deluxe 112 no drive channel

  1. #1
    Forum Member
    Join Date
    Aug 2020
    Posts
    2

    Fender Deluxe 112 no drive channel

    Hey guys and girls just bought a deluxe 112 and i have no drive channel output,normal channel plays fine, any thought?

  2. #2
    Forum Member DanTheBluesMan's Avatar
    Join Date
    Nov 2002
    Location
    Southern NH
    Posts
    4,717

    Re: Fender Deluxe 112 no drive channel

    is it one input or two, assuming normal input and drive input, or is it switched?

    If two inputs, maybe a bad jack

    if switched, maybe a bad switch
    "Live and learn and flip the burns"

  3. #3
    Forum Member
    Join Date
    Aug 2020
    Posts
    2

    Re: Fender Deluxe 112 no drive channel

    Quote Originally Posted by DanTheBluesMan View Post
    is it one input or two, assuming normal input and drive input, or is it switched?

    If two inputs, maybe a bad jack

    if switched, maybe a bad switch
    It has two inputs and its switched and when its on drive at high volume I hear some background noise but no audio.
    I pulled the board off the amp and resoldered the whole board maybe a cold solder joint and also seen a couple of burn spots near the high wattage resistors and diodes, my multimeters battery is dead but I'll get a new battery and start doing some troubleshooting.

  4. #4
    Forum Member DanTheBluesMan's Avatar
    Join Date
    Nov 2002
    Location
    Southern NH
    Posts
    4,717

    Re: Fender Deluxe 112 no drive channel

    uh oh. burn spots. burn spots bad.

    (said in voice of Franky from Hotel Transylvania)
    "Live and learn and flip the burns"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •