Results 1 to 2 of 2

Thread: Instructions on how to install full pickguard assembly

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #2
    Forum Member Don's Avatar
    Join Date
    Jul 2002
    Location
    Massachusetts
    Posts
    9,799

    Re: Instructions on how to install full pickguard assembly

    There might be one more ground attached to shielding paint in the cavity if they're modern Strats. I haven't seen any tutorials. You can desolder the wires at the jack and vibrato claw or at the pots. I desolder them at the jack and vibrato claw. The pots don't need any more heat.

    You may also find that some screw holes don't match up and new holes are needed. If so, drill small pilot holes. Don't try to drive the screws in without pilot holes. They can break and lead to bigger issues.
    Last edited by Don; 01-01-2018 at 10:15 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •