What do I use to glue the nut to the neck - - came loose with all the dry heated air in the house.
What do I use to glue the nut to the neck - - came loose with all the dry heated air in the house.
P e a c e KYC
Strat or Tele out of a 5E3 .
Bone nut.
P e a c e KYC
Strat or Tele out of a 5E3 .
One drop of white glue. I mean, ONE drop.
"No harmonic knowledge, no sense of time, a ghastly tone, unskilled vibrato, and so on. Chuck is one of the worst guitar players I know" -Gravity Jim
got it...
thx for confirmation.
P e a c e
P e a c e KYC
Strat or Tele out of a 5E3 .
Roger OA. The minimum amount of white glue is more than enough.
Wood glue....guitar capo.
"My flesh and my heart fail...but God is the strength of my heart and my portion forever."
PS. 73:26
MY JAMS--
http://www.soundclick.com/bands/defa...&content=music
On a strat I like the thickness sand the nuts so that it's a nice and tight fit in the slot if it's done nice and tight glue is really unnecessary hell if done correct you need a pair of plyers to pull it out . The force of strings tuned to pitch + a nut tightly seated in the slot and trust me it's not goin anywhere never had one shift on me yet anyways... I like crazy glue over wood glue I find removal a lot easier with crazy glue one tap of a hammer and it comes out clean wood glue I find likes to take out the surrounding wood around the glue joint with it when it goes - either that Or the but breaks off leaving just the bottom part still attached and those are awfull to remove