Results 1 to 3 of 3

Thread: Fender Tuners, Drilling the locator holes..

  1. 02-04-2010, 07:03 PM #1
    gibson-r8
    gibson-r8 is offline
    Forum Member gibson-r8's Avatar
    Join Date
    Mar 2004
    Location
    Stinkin Houston
    Posts
    23

    Fender Tuners, Drilling the locator holes..

    So getting ready to mount the Fender tuners, any tips on drilling the locator holes? How to mark the locations, ensure the tuners are aligned correctly... pretty easy stuff, I would like to hear your tips!!
    Reply With Quote Reply With Quote
  2. 02-04-2010, 07:27 PM #2
    Wilko
    Wilko is offline
    Forum Member Wilko's Avatar
    Join Date
    Jul 2002
    Location
    San Diego, CA
    Posts
    5,105

    Re: Fender Tuners, Drilling the locator holes..

    Screw on bushings with no mounting screws?

    Put them on, tighten the bushings then take them off and drill in the impressions.
    Reply With Quote Reply With Quote
  3. 02-05-2010, 05:31 AM #3
    gibson-r8
    gibson-r8 is offline
    Forum Member gibson-r8's Avatar
    Join Date
    Mar 2004
    Location
    Stinkin Houston
    Posts
    23

    Re: Fender Tuners, Drilling the locator holes..

    That seemed too easy, but was about what I had figured to do.. Thanks Wilko
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules