Results 1 to 6 of 6

Thread: No sound on tele deluxe

  1. #1
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    No sound on tele deluxe

    hey guys got a tele deluxe all wired up, but when i put the control side of the pickguard on the body, i get no sound. there is sound when i hold it 1/16" above the body, but no sound when i lay it on the body. what do you guys think?

  2. #2
    Forum Member Mesotech's Avatar
    Join Date
    Feb 2004
    Location
    Lafayette, LoUiSiAna
    Posts
    2,527

    Re: No sound on tele deluxe

    Bad solder joint or broken wire. With it off the body, wiggle the wires around to see if it cuts out.
    POO DAT!!!

  3. #3
    Forum Member melody's Avatar
    Join Date
    Jul 2002
    Location
    The third coast..!
    Posts
    3,667

    Re: No sound on tele deluxe

    Yup go over all your solder joints .... That's the fun of it all anyway..

  4. #4
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: No sound on tele deluxe

    ok, now i got a pop when i switch from neck to any other position

  5. #5
    Forum Member melody's Avatar
    Join Date
    Jul 2002
    Location
    The third coast..!
    Posts
    3,667

    Re: No sound on tele deluxe

    Check for solder in the switch..

  6. #6
    Forum Member chuckocaster's Avatar
    Join Date
    Sep 2003
    Location
    spanish for lard.
    Posts
    8,605

    Re: No sound on tele deluxe

    or see if you're grounding out in the bottom or side of the cavity. i've had this happen to me before in teles beings the way the hotdog plate is. easy way is to stick a piece of electrical tape on the switch and put it back together.
    "don't worry, i'm a professional!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •