Results 1 to 4 of 4

Thread: 1x12 Hot Rod Deluxe tranny replacement - safety issues?

  1. #1
    Forum Member wurlwynd's Avatar
    Join Date
    Apr 2003
    Location
    Spanish Castle
    Posts
    86

    1x12 Hot Rod Deluxe tranny replacement - safety issues?

    Hi all,

    I am replacing the transformer on my hrdlx with a mercury magnetics axiom (model number FBFS-O40M, their recommended swap). I am here to ask of any relevant safety issues you learned gentlemen may be aware of in swapping these out.

    I know to discharge the caps, but what else could go wrong? (Other than not following the axiom wiring diagram.) Any special hints or instructions (warnings)?

    Thanks for all your time,

    WW

  2. #2
    Forum Member concert410's Avatar
    Join Date
    Jan 2003
    Location
    Northeast Ohio
    Posts
    788
    I am not an amp guru, but you may get faster response over atthe LPF. This is not a slam for this place, but lately there is more "action" over there. Good luck either way...

  3. #3
    stxrus
    Guest
    unplug from the ac, discharge all electrolyic caps, remove all metal jewelry, and if possible keep one hand in your pocket.

    sort of words to "live" by.
    steve

  4. #4
    Forum Member wurlwynd's Avatar
    Join Date
    Apr 2003
    Location
    Spanish Castle
    Posts
    86
    Thanks, Gents.

    I have gotten proper instructions for this replacement. That last post pretty sums up what I found out, except to make sure I don't mix up the taps.

    The tranny needs safety too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •