-
2002 American Standard Neck Adjusments
Hi Gang,
I have a 2002 American Standard Tele from the Corona Shop. It has a Maple Neck with a Rose Wood Board. I was wondering if anyone can tell me about seting up the Neck. It has the Standard truss nut adjusment on the headstock but it also has a hole in the cover where the neck plate cover. Does the hole in the neck plate allow access to some adjusment shim and if so what exactly is this adjusment for? Any help would be great.
Thanks OG
-
Forum Member
Formerly Stroker Ace
It's called the "Micro Tilt". It adjusts the tilt of the neck. It replaces having to use shims.
Last edited by Fendercrazy; 05-12-2003 at 06:55 PM.
-
Yeah thats what I thought. Do I have to pull the strings and loosen up the Neck bolts to adjust?
Thanks OG
-
Forum Member
Formerly Stroker Ace
Yeah, loosen the neck screws a little. When you tighten the neck back down make sure the torque on the screws are pretty ballanced from side to side.
-
Worked Like a charm neat feature Thanks for Your Help.
Later Old-Guy
-
Forum Member
Formerly Stroker Ace
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules