Whats on your pedal board?

[pit_s_xroad]

...

i see you like the Blackie and baja, believe they both have that same great soft V neck ;-)

yes... both have the soft V...
the baja neck is more beefy than the one on the Blackie...

PIT...

[mmcquain]

I've tweaked mine a little (added the Voodoo Lab Tremolo, etc.) but I think
I'm finally really happy with everything on it (I know - famous last words!!! LOL)

[pit_s_xroad]

...

...but I think I'm finally really happy with everything on it (I know - famous last words!!! LOL)

...

oh yeah... let's see how long... there always is a stomp-box or another change just around the corner... waiting to hit you from behind with G.A.S.... *ha ha ha*

That's an outstanding board...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I did some changes, too...



kicked out the BOSS Tremolo and back in is the BOSS RV-3 Reverb again... and changed place with the DD-3... furthermore the LPV-1 Boost ist now in before the Fulltone in the signal chain...

Greets
PIT...

[mmcquain]

oh yeah... let's see how long... there always is a stomp-box or another change just around the corner... waiting to hit you from behind with G.A.S.... *ha ha ha*

That's an outstanding board...

Yes, GAS is always waiting... just ready to strike at any moment.
And thanks - your's in a nice looking board as well.

[Csapo]

Csapo, what kinda connecting cables are you using for your board? They are so clean.

My board is Furman SPB-8. It's loaded as follows:

Peterson Strobostomp...Crybaby Classic Wah...Vox Valve Tone OD...Fulltone OCD...Xotic BB Preamp...Maxon AD999 Delay, or MXR Carbon Copy delay...65 Deluxe Reverb Reissue, verb engaged at 2, trem engaged for fun occasionally.

I play 62 Reissue Strats, or my Gibson Elliot Easton SG into this set up.

Pics to come.

Thanks. They are Canare G6, from Lavaman. I was able to find most of them used and they have worked out great. Clean look and great tone.

My board is being completely redone this weekend. Scaled it back to 10 pedals (down from 19 ), which includes the tuner. I am going to be running them through a Carl Martin Octa-Switch loop. We have our set list finalized and I've settled on which pedals are on the board. I'll post another pic, once it is all set up.

Look forward to seeing pics of your board.

[Rickenjangle]

I'll have to get a pic of my new layout when I finish it...

I decided to go back to using just the smaller Gator pedalboard, since the big one was a back breaker. I cherry-picked my favorite effects, made some concessions, and now I just need to make sure all works well and then I'll take phtots.

I have decided that I am going to go with a Line6 X3 Live board for church because of stage volume issues - and because I'm looking for the easiest possible - yet flexible - setup for Sunday mornings, and a sound that will travel around with me from venue to venue with consistent sounds. I daresay that the new X3 Live is the finest of its kind that I can afford...

Still, for live club gigs it'll be the main pedalboard, which is really based around my old trusty TS9/SD1/DD20 combination.

[Csapo]

Our cover band is starting rehearsals next week. I only know a small portion of the proposed set list, so this board is just to be prepared for anything and everything.

Once the set is finalized, I will probably end up with 2 -3 dirt pedals and one or two delays. Wah pedal and vibe are coming along with me just in case and might be added too.

Also, I'm on the fence with the BBE Sonic Stomp. Might be quickly off the board next week...

Finally got a pic of my updated and almost final board.

Started out with 10 OD/Boosters and ended up with 4.

Using a Musicomlab EFX switcher, which is a terrific unit. Going to try to run the MIDI with my Timefactor.

I just sold my Sunlion and that will be replaced with the Lovepedal BBB07...

[Dale]

UPDATE:

I have 2 main boards ... Big board ...



Smaller Board is finally set up ...



The space is for the foot switch from my amp.

[GuitarG]

I just incorporated the M13 into my rig. Here's the chain:
Guitar>M13>FX Loop post FX1 to Modified Vox Wah-Xotic RC Booster-Landgraff Dynamic Overdrive>Radial ABY switch>amps.
I use two amp rigs, a '63 Bassman into a Marshall cab for my 'dirty rig' and a Mesa Blue Angel 4x10" combo for my clean rig.
I'm using two Roland EV-5's using pedal 1 primarily for mix levels with delay patches and using pedal 2 for most everything else (speed switch on the rotary patch, reverb mix levels, tremolo depth, etc.)

[Franklin]

I need to get a pic up here:

Analog Man Sun Lion fuzz booster > HAO Rust Driver > Teese Real McCoy Picture wah > MXR Auto Q > Alf Hermida's Zendrive > Dr. Scientist Sunny Day delay > Peterson Strobostomp tuner > Electro-Harmonix P.O.G. Poly Octave Generator > Rooster Booster

[Nairbr]

Guitar
Dunlop Classic Wah
Boss TU2
Mesa Boogie V Twin Series 2
Visual Sounds H2O Chorus / Delay
T-Rex Fuel Tank Classic Power Supply

On my wish list is a Fulltone DejaVibe & T-Rex Reptile

[Chito]

Decided to downsize, although I still have my big main board. ;)

[CocoTone]

The Monkey has been replaced with a Zendrive.

CT.

[stratav57]

There is my new uptade board with Monorail cable: