For experts - have I bought a real strat or a flawed/fake?

just bought my first fender strat over the net. Ive owned a strat before, but it wasn't fender. Finally bought the real thing and well, its the real thing. Incomparable to other strats.
Its a 2015 fender american standard stratocaster.
Anyways, there is something that appears strange to me.
my fram of reference was the other strat I had, so I will be talking about it.
On my other strat, it had a wilkinson trem. When the bridge was tight to the body (and not floating slightly up), the trem arm was at a 90 degree angle to the body and it was possible to swing the trem arm in a 360 degree trajectory.

However, on the new fender strat, when the bridge is tight to the body, the arm is at an angle of around 75 degrees, which means I cannot swing it round 360 as its trajectory takes it into the jack cable. It screws in at an angle. It is quite annoying...
Is this normal for fender? It seems like a strange design flaw...
Or maybe the guy sold me a flawed one?

Thanks very much for your help!

I will include some pics:
https://photos.app.goo.gl/9wVW7ayPr7xHFFZn9
https://photos.app.goo.gl/4KyeuufkJTW5F3fT9
https://photos.app.goo.gl/VmjeqpPzkvcegba76

I like threads like this but I can't read yours because of the font colours. Ok, I am gettin' old, but could you brighten up the letters some?

Thanks

Doc- Highlight the text with your cursor and you'll be able to read it.

To the OP- the hole for the arm in a Fender vibrato is drilled on an angle- not perpendicular to the bridge plate.

I don’t think there’s anything wrong either.