Results 1 to 15 of 15

Thread: Rickenbacker owners, how high is your bridge?

  1. #1
    Forum Member S. Cane's Avatar
    Join Date
    Dec 2014
    Location
    Ever heard of José Carioca?
    Posts
    4,663

    Rickenbacker owners, how high is your bridge?

    Quick question:


    How low do you 620/660 and similar RIC owner fellows set up your bridges?


    Mine is set pretty high, and still when I bend the high E string on the 16th or 18th fret it gets muted by the next fret.


    AFAIK the truss rod doesn’t help bends that high up the scale.


  2. #2
    Forum Member phantomman's Avatar
    Join Date
    Aug 2007
    Location
    Ten miles from the Mexican Frontier, in Arizona
    Posts
    7,321

    Re: Rickenbacker owners, how high is your bridge?

    Your neck may need a skosh more relief.
    "When injustice becomes law then rebellion becomes duty."

  3. #3
    Forum Member S. Cane's Avatar
    Join Date
    Dec 2014
    Location
    Ever heard of José Carioca?
    Posts
    4,663

    Re: Rickenbacker owners, how high is your bridge?

    Quote Originally Posted by phantomman View Post
    Your neck may need a skosh more relief.
    I thought about that but would it help above the 14th fret? I was wondering if it wouldn’t be a matter of raising the bridge

  4. #4
    Forum Member phantomman's Avatar
    Join Date
    Aug 2007
    Location
    Ten miles from the Mexican Frontier, in Arizona
    Posts
    7,321

    Re: Rickenbacker owners, how high is your bridge?

    You could try raising the bridge but then you run the risk of the overall action being too high,

    Do you know any competent luthiers where you live?
    "When injustice becomes law then rebellion becomes duty."

  5. #5
    Forum Member jrgtr42's Avatar
    Join Date
    Jan 2006
    Posts
    1,181

    Re: Rickenbacker owners, how high is your bridge?

    |I was just playing mine and thought about this thread. Mine's not a 600-series - it's a 330, but |I checked the bridge and the bass side is at a good 5mm - about 1/4", plus or minus. The treble side is maybe a touch lower, but I didn't measure it; this is just by eye.
    The action still is pretty low, but I don't get any fretout anywhere up the neck.
    ********************************
    "Do you call sleeping with a guitar in your hands practicing?"
    "It is if you don't drop it."
    - Trent Lane, Daria, Episode 1-2.

  6. #6
    Forum Member Offshore Angler's Avatar
    Join Date
    Sep 2003
    Location
    New York Finger Lakes Area
    Posts
    8,514

    Re: Rickenbacker owners, how high is your bridge?

    Ricks really aren't designed for bending.
    "No harmonic knowledge, no sense of time, a ghastly tone, unskilled vibrato, and so on. Chuck is one of the worst guitar players I know" -Gravity Jim

  7. #7
    Forum Member S. Cane's Avatar
    Join Date
    Dec 2014
    Location
    Ever heard of José Carioca?
    Posts
    4,663

    Re: Rickenbacker owners, how high is your bridge?

    Maybe not all Ricks. I played 2 models, my wife’s uncle’s Lennon 325 and my 620.

    The 325 feels indeed a bit too short for soloing but my 620 has one of the fastest necks I’ve ever played. It is more comfortable than a SG and I don’t think I’d have any problems even if I were a shredder.

    Here’s an example


  8. #8
    Forum Member blackonblack's Avatar
    Join Date
    Jan 2004
    Location
    point of reason between tacky and tasteless
    Posts
    1,398

    Re: Rickenbacker owners, how high is your bridge?

    Fret rocker your frets. Yes Rics are weird, but the same rules apply. Before doing anything, see if there is a proud fret.

    id measure my 360/12 but I suffered the dreaded R tailpiece explosion. Replacing with a Winfield Harp. Actually when employed again, it’s off to Mark Arnquist for a complete service. He is absolutely the best person to work on Rics.
    Mark

  9. #9
    Forum Member Michael Smith's Avatar
    Join Date
    Dec 2021
    Location
    Southeast Texas
    Posts
    692

    Re: Rickenbacker owners, how high is your bridge?

    Check out some of the twoodfrd videos. He mainly works on acoustics, but the principles are the same. He is always measuring the neck relief at the 12th fret, the nut height and the bridge height. I don't think I've seen him work on a ric, but he has recently worked on several electrics.

    Is it possible you have a high fret somewhere high on the neck?
    "When You're Riding Down the Highway at Night, And You're Feeling that Wild Turkey's Bite" ZZ Top

  10. #10
    Forum Member phantomman's Avatar
    Join Date
    Aug 2007
    Location
    Ten miles from the Mexican Frontier, in Arizona
    Posts
    7,321

    Re: Rickenbacker owners, how high is your bridge?

    Quote Originally Posted by Michael Smith View Post
    Is it possible you have a high fret somewhere high on the neck?
    +1

    It's why I mentioned having a competent luthier take a look at the guitar.

    Rickenbacker is renown for their fastidious quality control but you never know......
    "When injustice becomes law then rebellion becomes duty."

  11. #11
    Forum Member Michael Smith's Avatar
    Join Date
    Dec 2021
    Location
    Southeast Texas
    Posts
    692

    Re: Rickenbacker owners, how high is your bridge?

    If you have a short straight edge that will span 3 frets, place it on top of 3 frets on both the high and low E sides of the neck and see if it will rock back and forth, starting at the body end of the neck, and work your way towards the headstock by moving the straight edge one fret at a time. You may need a slightly longer straight edge once you get to the frets that are spaced further apart.
    "When You're Riding Down the Highway at Night, And You're Feeling that Wild Turkey's Bite" ZZ Top

  12. #12
    Forum Member S. Cane's Avatar
    Join Date
    Dec 2014
    Location
    Ever heard of José Carioca?
    Posts
    4,663

    Re: Rickenbacker owners, how high is your bridge?

    Thanks, friends. I’ll check for tall frets and run a full setup if necessary.

    I was wondering about a simple bridge tweak because the action is comfortable and these bridges are very different from other brands’s. I was curious about how high other owners leave theirs.

  13. #13

    Re: Rickenbacker owners, how high is your bridge?

    Quote Originally Posted by S. Cane View Post
    Quick question:


    How low do you 620/660 and similar RIC owner fellows set up your bridges?


    Mine is set pretty high, and still when I bend the high E string on the 16th or 18th fret it gets muted by the next fret.


    AFAIK the truss rod doesn’t help bends that high up the scale.
    Regarding your issue with the high E string getting muted by the next fret when you bend it on the 16th or 18th fret, it could be due to a variety of factors, including the height of the bridge, the action of the guitar, the neck relief, and the string gauge and type.
    If you have already set the bridge height to a comfortable playing level, you might want to consider adjusting the intonation to ensure that the strings are properly tuned and fretted notes are in tune. Additionally, you could try experimenting with different string gauges or types, such as lighter gauge strings or flatwounds, to see if that improves the situation.

  14. #14
    Forum Member Offshore Angler's Avatar
    Join Date
    Sep 2003
    Location
    New York Finger Lakes Area
    Posts
    8,514

    Re: Rickenbacker owners, how high is your bridge?

    If it's confined one area on the neck always start with fret leveling. If the frets aren't level you'll chase it to infinity. I'd see if the gage is rocking in the area where you're having problems. If you find a high one a few taps with a fret hammer and then level and recrown and polish should take care of it.

    About a 10 minute fix.

    Neck relief needs to be zero before you check the or level the frets. I run all my guitars with just-perceptible relief. They're basically straight but I want to just perceive motion when I check, that way I know it isn't' back bowed.

    Generally, if you need any relief you have fret or nut issues.
    "No harmonic knowledge, no sense of time, a ghastly tone, unskilled vibrato, and so on. Chuck is one of the worst guitar players I know" -Gravity Jim

  15. #15
    ZoneFiend photoweborama's Avatar
    Join Date
    Oct 2003
    Location
    Sacramento, CA
    Posts
    7,253

    Re: Rickenbacker owners, how high is your bridge?

    Quote Originally Posted by Offshore Angler View Post
    If it's confined one area on the neck always start with fret leveling. If the frets aren't level you'll chase it to infinity. I'd see if the gage is rocking in the area where you're having problems. If you find a high one a few taps with a fret hammer and then level and recrown and polish should take care of it.

    About a 10 minute fix.

    Neck relief needs to be zero before you check the or level the frets. I run all my guitars with just-perceptible relief. They're basically straight but I want to just perceive motion when I check, that way I know it isn't' back bowed.

    Generally, if you need any relief you have fret or nut issues.
    You sound like me...
    fret level is my guess. after I level frets, I too set the neck relief to near zero.
    The Best Guitar Photos On The Net!
    Photoweborama

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •