Results 1 to 9 of 9

Thread: Swapping the bridge on Duo Sonic

  1. #1
    Forum Member
    Join Date
    Jun 2007
    Location
    Mesquite, TX
    Posts
    7

    Swapping the bridge on Duo Sonic

    I just aquired a Fender Duo Sonic. It is one of the reissues made in mexico. The guy that had it before me didnt like the small neck so he put an aged Strat neck on it. It plays great but i hate the bridge! Cant get the intonation right and the strings just kinda slide around on the saddles. Im thinking about just putting a fixed strat bridge on it cause i dont know much about all this and i dont wanna risk drilling holes in my guitar. Any suggestions??




  2. #2
    Forum Member Jonnda's Avatar
    Join Date
    Sep 2005
    Location
    Evanston IL, or Bluffton OH... which ever comes first.
    Posts
    2,117

    Re: Swapping the bridge on Duo Sonic

    I don't really have a good solution for you, but what I do have is a link to other people's crazy ideas to fix the bridge. this is my favorite:


    Here are the links:
    http://www.jag-stang.com/forum/viewt...hp?f=5&t=15263

    http://www.marcelroy.com/mods/bridge/
    "The other Shaltanac's joopleberry shrub is always a more mauvy shade of pinky-russet."

    "there's NOTHING WRONG with a live penguin, but...I expected a hamburger!"

  3. #3
    Forum Member Don's Avatar
    Join Date
    Jul 2002
    Location
    Massachusetts
    Posts
    11,295

    Re: Swapping the bridge on Duo Sonic

    Will a Duo-Sonic even intonate correctly with a Strat neck without moving the bridge?
    What's the scale length on an MIM Duo-Sonic?

  4. #4
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Swapping the bridge on Duo Sonic

    I believe it's 22"

  5. #5
    Forum Member Fripperton's Avatar
    Join Date
    Nov 2003
    Location
    Earth. Early 21st Century.
    Posts
    2,968

    Re: Swapping the bridge on Duo Sonic

    The Duo-Sonic scale length is too short to intonate properly with a Strat neck. It could be either a 24" scale length or a 22.5" depending on the model. Measure from the nut to the 12th fret of the neck. Use that measurement and extend it onto the body of the guitar from the 12th fret. That will tell you where the bridge should be located to intonate the guitar properly. On a Duo-sonic you'll come up a few inches shy of where it should be. You need a shorter scale neck.
    VM



    If aliens listened to our current top 40, they'd think that the entire planet was populated by sexually ambivalent robots with ethnic insecurity.



  6. #6
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Swapping the bridge on Duo Sonic

    Fripp, you have a way with words

  7. #7
    Forum Member Wilko's Avatar
    Join Date
    Jul 2002
    Location
    San Diego, CA
    Posts
    5,105

    Re: Swapping the bridge on Duo Sonic

    It should be ok. You'll need to get them saddles moved back almost all the way.


  8. #8
    Forum Member
    Join Date
    Jun 2007
    Location
    Mesquite, TX
    Posts
    7

    Re: Swapping the bridge on Duo Sonic

    Thanks for all the suggestions. The guy that i got it from gave me the original neck as well, so i could put that one back on if that would help. This strat neck is sweet though. How do these sound with the original neck? Seems like it would sound really thin.

  9. #9
    Forum Member Don's Avatar
    Join Date
    Jul 2002
    Location
    Massachusetts
    Posts
    11,295

    Re: Swapping the bridge on Duo Sonic

    It would only take a few minutes and a set of strings to find out.

    Short scale Fenders are fun to play. They're very slinky feeling due to the shorter scale length.

    If you like it, you could probably sell the Strat neck for what you paid for the guitar!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •