Page 1 of 3 123 LastLast
Results 1 to 40 of 93

Thread: Fender Harvard Reverb II

  1. #1
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Fender Harvard Reverb II

    Hi,
    Anyone knowledgeable or own a Harvard Reverb II? I'm looking to buy one used but need some advise on what to look for and what to listen to while checking it out. I looked at it and the pots are scratchy, the volume cut in and out (low to high/owner said it was the cable that was attached, it did stay at the same volume after he adjusted it), and the case is a little ruff looking. I talked the owner into selling it for $65.00. Any comments? Thanks.


    Note: This will be my first amp and I don't have a lot of cash.




    EvilTwin
    Last edited by EvilTwin; 01-13-2008 at 12:38 AM.

  2. #2
    Forum Member rudutch's Avatar
    Join Date
    Jan 2004
    Location
    state that looks like a mitten
    Posts
    5,260

    Re: Fender Harvard Reverb II

    if it works, $65 seems rather reasonable to me

    http://reviews.harmony-central.com/r...le+Reverb/10/1
    Last edited by rudutch; 01-12-2008 at 05:10 PM.
    do I look like I know what I'm doing?

  3. #3
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Rudutch,
    Thanks for the reply. No offense but your post doesn't really help. The link you provided was for a different amp. I found the amp I'm looking at, at the HC website and that doesn't really help either. Any other info would be appreciated. Thanks anyway.


    EvilTwin

  4. #4
    Forum Member rudutch's Avatar
    Join Date
    Jan 2004
    Location
    state that looks like a mitten
    Posts
    5,260

    Re: Fender Harvard Reverb II

    oops

    http://reviews.harmony-central.com/r...Reverb+II/10/1

    for what ever reason there is not much info out there on the older solid state stuff, yours is kinda rare making it touger to find info on, HC is not the definative site but thats all I came up with.

    Listen to it, play it. It it works properly and YOU like how it sounds, do it
    do I look like I know what I'm doing?

  5. #5
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Rudutch,
    Thanks. I'm going to get it right now. At least I won't be out an arm and a leg if there is a problem with it latter on. Thanks.

  6. #6
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Well, it looks like I screwed myself. I paid the guy, took the amp home, then did some more research on this amp (looking for owners manuals, pics, ect...) and found out there is supposed to be an external speaker jack on it. Hmmm, no external speaker jack, looks like a completely different chassis. Contacted the seller via e-mail requesting a full refund since it is late. This sucks, but it's my fault for not fully researching and getting caught up in the moment of getting my first amp. You live and learn, hope I can get a refund.



    EvilTwin

  7. #7
    Forum Member javlib's Avatar
    Join Date
    Dec 2006
    Location
    Pueblo, Colorado
    Posts
    356

    Re: Fender Harvard Reverb II

    Let's see a couple pics, you're not necessarily screwed, maybe you got something better. If it works and sounds acceptable, then it's worth something.

  8. #8
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Here is the link to a picture of the amp I just purchased, read the posted comment ( http://www.flickr.com/photos/22818657@N08/2188767482/ ). Also here is a link to what the amp should look like ( http://www.trademe.co.nz/Music-instr...p-57432443.htm ). Thanks.

    I see your point but I was under the impression that I was buying a complete Fender Amp, not somebody's project. I even asked the guy if anything had been replaced and if the amp was in its original state. I should have suspected something when I saw a VOX torn apart in his living-room.


    EvilTwin
    Last edited by EvilTwin; 01-12-2008 at 10:16 PM.

  9. #9
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    Look on the underside of the chassis.

  10. #10
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Nope, only the power cable, transformer, and two plugs connecting the spring reverb unit.



    EvilTwin
    Last edited by EvilTwin; 01-12-2008 at 10:09 PM.

  11. #11
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    Where is the speaker out jack?

  12. #12
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    There isn't one.

  13. #13
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    So how does it produce sound?

  14. #14
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Ok, I understand. The onboard speaker is sent directly through the underside of the chassis and into the PC Board. No plug in connector.

  15. #15
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    Oh ok. Gotcha. Lemme research and get back to you.

  16. #16
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Thanks for the help.

  17. #17
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

  18. #18
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Yep, thats what I have except what looks like a ground wire attached to the upper right side of the chassis. Is this an export model that fender made for the Harvard? Thanks.

  19. #19
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    nope. yours and the one i just posted are both 120v models.

  20. #20
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Then the amp on the link and my amp are modified versions? Not getting the overall picture here. Did Fender make two different versions of the same USA Harvard?

  21. #21
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    I believe the difference is the year models. Can you post a picture of the underside of the chassis?

  22. #22
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Not right now, my pic limit was reached when I posted the image I have up now. I also noticed that the fuse values are different from my amp and the one pictured from the "Trade Me" link. Thanks.


    I can describe it to you.

  23. #23
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    The trademe amp is a Euro import amp.

    Also, it looks like it's been modded to have the external speaker jacks. Those aren't stock jacks.

  24. #24
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Yep, just noticed the 240 V on the back plate. According the Harmony Central's reviews of this amp it has an external speaker jack like the TradeMe links, thats what has me confused here. Maybe there are three models, two USA models (one with and one without ext speaker jack depending on the year made) and one export model with ext speaker jack. I am too confused here. This really wouldn't be a problem if there was some documentation on this amp. I can't seem to find any on the internet. I might call Fender and ask them.

  25. #25
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    What kills me is the serious lack of online information about these amps. I'll keep looking though.

    That just doesn't look like a stock jack job to me. It's got the bare chassis with 2 jacks, no labeling or anything. Just my opinion.

  26. #26
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    I just copied the pic from TradeMe and I'm going to check it out in Photoshop. Maybe the labeling is blown out and we can't see it.

  27. #27
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    Well, in my experience, I've never seen a stock Fender with the bare chassis on the back with a jack attached with no label or anything.

    Even on the stock SF amps, the jacks and everything (except the utility plug terminal) had a faceplate.

  28. #28
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    I'll take your word for it since I don't have a clue or experience. i bumped up the contrast and all I see is rust on the jack, no label. Maybe these are after-market modifications done to the amps. No info on that either.

  29. #29
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    Just wait a while and the real experts will chime in with their opinions (most likely a lot better than mine because they were alive when this amp was made )

    I'm off to bed. Peace. Hope I helped a bit.

  30. #30
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    hippiebob01,
    Thanks man, you did.



    EvilTwin

  31. #31
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Any one else have an opinion on this amp?

  32. #32
    Forum Member
    Join Date
    Jul 2005
    Location
    So Calif
    Posts
    3,321

    Re: Fender Harvard Reverb II

    EvilTwin,

    Someplace around here I have a Fender brochure that lists these amps. IIRC, they were produced the same time as some of the "Rivera" Fenders. I knew a guy who had a SS amp from this era - I think it was called a London Reverb (?). He seemed pleased with it. I'll look for the brochure, and if I can find it will post any information it has regarding that model.

  33. #33
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    JAM,
    Thanks. It's tuff finding any info on this amp, all help will be appreciated.


    EvilTwin

  34. #34
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    Well, after I was unable to get any information from anyone here on the board (I am surprised no one has this amp) I was forced to buy a Owners Manual and Data Sheet/Schematic from some obscure company in Maryland (Fender has the schematic for sale on their web-site but not the owners manual, strange). Thanks to all that tried to get me some information about this amplifier.



    Note: My next amp will be the Fender Twin PRO Tube 100 watt once I have the money.





    EvilTwin

  35. #35
    Forum Member Rickenjangle's Avatar
    Join Date
    Jul 2004
    Location
    Rochester, NY
    Posts
    6,131

    Re: Fender Harvard Reverb II

    Speaking of SS Fender amps - one of the amps that I still wish I had was a Fender Sidekick 30R. That lil' amp sounded really, really nice for the money. 10 or 12-inch speaker (I never measured it - I was a kid who didn't know from gear) and IIRC footswitchable clean/overdrive with 2 knobs (gain and level) to sculpt the overdrive. Decent reverb. Shoot, for what I paid for it, looking back on it, it was a great deal.
    Blackface cosmetics, and a line out.

    This may seem like heresy but I actually like some of the older SS amps almost as much as I like my tube amps.

    "I'm gonna find myself a girl
    that can show me what laughter means
    And we'll fill in the missing colors
    In each other's paint-by-number dreams..."

  36. #36
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    It's funny that you mention that about the older Fender SS amps. Owners of this amp said the same thing from the the nine reviews I did find on this amp. Unfortunately I don't have a clue (Tonality Speaking) between SS and Tube, since this is my first amp (I just started playing again after 22 years). When I was younger I modified a cable and plugged it into my stereo and used that as an amp (didn't have money back then). I have a new Fender Deluxe Strat that I bought 8 years ago, it was just sitting in the closet and decided to start playing again. I've been taking lessons for the past month and I'm glad I started again.




    EvilTwin

  37. #37
    Forum Member
    Join Date
    Mar 2007
    Location
    southwest georgia. the state.
    Posts
    1,640

    Re: Fender Harvard Reverb II

    Let us know what you find out when you get the manual. I definately want to know what the specs are.

  38. #38
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    I'll post the specs in about a week. That should be enough time for my manual to arrive. Since Fender doesn't have the manual, maybe I'll sell it to them .




    EvilTwin

  39. #39
    Forum Member NeoFauve's Avatar
    Join Date
    Sep 2003
    Location
    in interesting times
    Posts
    12,530

    Re: Fender Harvard Reverb II

    I didn't notice any "missing" jacks in the photo.
    The presence of that "speaker on-off" switch might mean there'd be no need for a speaker jack. You flick the switch and plug phones in. There should be a wire coming out of the chassis somewhere, going to the speaker.
    If the jacks were "missing" there'd be empty holes, rather than bare aluminum.
    It's unlikely, to say the least, that someone filled two holes that well on this amp. People only do stuff like that to return previously modded "collectable" amps to original appearance.

    For $65 SS Fender, as long as it's functioning, you probably did okay, and I wouldn't sweat these suspected "missing" jacks too much.
    It's not the type of Fender you'll find a wealth of info on.

    How do we know that second amp isn't modded?
    It looks like 2 "extras" on the right side of the back of the chassis.
    "Well, I used to be disgusted, now I try to be amused..."
    Elvis Costello

  40. #40
    Forum Member EvilTwin's Avatar
    Join Date
    Jan 2008
    Location
    Cocoa, FL USA
    Posts
    44

    Re: Fender Harvard Reverb II

    NeoFauve,
    Thanks for the reply. I am leaning towards your thoughts on this but I'm still not 100% convinced because; all of the reviews on Harmony Central say that there is an external speaker jack, unless all the owners of these amps have modified amp's. I'll just have to wait and see what the manual says when it gets here. Thanks.



    EvilTwin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •